PREMIUM EYEGLASS PLIERS

These Premium Eyeglass Pliers are exclusively designed to easily adjust eyeglasses. These pliers have two jaws one jaw has a depression to accommodate the shape of the pad. The other jaw is slotted to accommodate the shape of the pad. The collection included Bridge Reducing Temple Tip Adjusting Pliers, Chipping Pliers, Nose Pad Adjusting Pliers, Eyeglass Cutters, Angling Pliers, Eyewire Shaper Pliers, Rimless Compression Pliers, Size Testing Pliers, Bracing Pliers, and Finger Piece Pliers.

5001001 Bridge Reducing Temple Tip Adjusting Pliers

Replacement Plastic Jaws for Bridge Reducing/Temple Piece Adjustment Pliers.

Part No: 5001001
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001002 Chipping Pliers

Designed to chip away excess lens or blank material. Serrated gripping jaw for strong holding power

Part No: 5001002

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle 

5001003 European Nose Pad Adjusting Pliers

European Nose Pad Adjusting Pliers have a slim 4.7mm profile allowing better mobility when adjusting within tight clearances. The nylon jaw is slightly curved 
which helps protect soft silicone nose pads from damage.

Part NO: 5001003
Length: approx.   139.7MM
Weight: approx.   100 g
Material:Stainless steel
Finish:Dull mate 
Handle: Stainless steel Dull mate handle

5001004 Flat Snipe Nose Pliers 5mm

Flat Nose Pliers 5 mm
5 mm width at tip.

Part No: 5001004

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material:Stainless steel
Finish:Dull mate 
Handle: Stainless steel Dull mate handle

5001005 Flat Snipe Nose Pliers Extra Long 

Flat inner jaws. Extra-long and thin version.

Part No: 5001005

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish:Dull mate 
Handle:Stainless steel Dull mate handle

5001006 Front Cutter

Cuts     nickel-silver     screws     and     rivets
Note: does not cut stainless steel

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001007 Hinge Setting Or Angling Pliers

Parallel mouth opening still at 1 mm
Width of mouth 4.0 mm

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001008 Flat Nylon Round Metal

Flat Nylon/Round Metal Pliers 
For semi-rimless cord suspension and    general     adjustments
10mm protected,non-scratching jaw cover and round metal blade tapered to 2mm

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001009 Inclination Pliers Cylindrical 8 mm

This tool is used to align the temples. This tool has a classic high-quality design and is perfectly 
manufactured out of the best surgical rust-free stainless steel. 
The ergonomic glazed-finished designed handles allow for a sure grip. 
The weight is kept to a minimum. 
The perfect finish of this tool enables one to meet the demands required 
to produce work of the highest quality.


Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001010 Nylon Eyewire shaper 24mm pliers

Forms the curvature of metal eye wires into conformance with the curvature of a lens
Non-Marking, replaceable nylon jaws

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

 5001011 Hinge Setting or Angling Plier


 With two concave indentations, the parallel mouth opens at 1mm,.
 Width of mouth: 4.0 mm

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001012 Rimless Compression Pliers

Precise control for assembling compression mount frames. 
Jaw design features grooves to cradle sleeves and hardware 
for precise control while assembling. 
Lens side jaw rocks to adjust for base curve during assembly. 
Non-marring jaws prevent lens damage.

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001013  Flat snip nose pliers

Semi circular- jaws 


Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001014 Side Cutter

Cuts     nickel-silver     screws     and     rivets
The design allows     flush     cuts     in     tight     areas
Note: does not cut stainless steel

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001015 Size Testing pliers


A narrow/tapered jaw for better access to the latest fashion frames
Angled tips prevent damage to screw barrels

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001016 Special Front Cutter for Plastic Sleeves

For cutting plastic sleeves on frames such as "Minimal Art" from Silhouette. 
The narrow shape of the jaws and the filigree cutting edges reduce the danger 
of scratching the lenses.

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001017 Special Pliers for Screwless Rimless Frames

For use on three-piece rimless bushings exclusively. 
The cutting end is highly polished to eliminate the 
risk of damage to lenses; therefore using this on other 
materials are not recommended.

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001018 Trident Pliers

For precise and easy adjustment of clip-on bridges.

Part No 
5001018

Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

5001019 Wide Rimless Bracing Pliers

The economical alternative with Bristal enterprise quality. 
Lab use quality. Stainless steel, box joint construction. Cushioned grip, single leaf spring models. 
Securely braces rimless eyewear while making endpiece adjustments.
Use with temple and endpiece adjusting pliers.


Descriptions
Length: approx.   139.7MM
Weight: approx.   100 g
Material: Stainless steel
Finish: Dull mate 
Handle: Stainless steel Dull mate handle

Bristal Enterprises 

Optical Tools

Bristal Enterprises.

Haji Pura Bun. Solehri Street. SIalkot 51310. Pakistan. 

info@bristal.com          www.bristaloptical.com

Phone +923008711667 WhatsApp +923008711667

  • LinkedIn Social Icon
  • Google Places Social Icon
  • Blogger Social Icon
  • Instagram Social Icon
  • Pinterest Social Icon
  • Facebook Social Icon
  • Twitter Social Icon
  • Google+ Social Icon
  • YouTube Social  Icon